Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Electrical / Infotainment / Antenna System / DA-RM-07M021-03-004 - Remove/Install panel - Antenna mount
Preparation work
1.     
2.     
Care Point: Disconnect 12V battery during Remove/Install seat procedure.
3.     
Care Point: Remove both sides.
4.     
Care Point: Remove both sides
5.     
Care Point: Remove both sides
6.     
Care Point: Remove both sides
7.     
8.     
9.     
10.    
Care Point: Remove both sides
11.    
12.    
13.    
14.    
15.    
16.    
17.    
18.    
Care Point: When removing the facia, also remove the right hand display control unit bracket.
19.    
20.    
21.    
22.    
23.    
Care Point: Remove both sides.
24.    
Care Point: Disconnect body controller only.
25.    

Remove panel - Antenna mount
1.  
Disconnect electrical connectors (1).
 
2.  
Remove nut (2) and detach ground cable.(M6) 5 Nm
 

3.  
Remove bolts (3).(M5x12) 5 Nm
 
4.  
Remove panel (4).
 


Install panel - Antenna mount
 
Care Point:
Where required and fitted.

 
1.  
Transfer antennas to replacement panel.
 
2.  
Install component in reverse order.
 
3.  
Check functionality of antennas where possible/required.
 

   
   
   Note