Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Interior / Interior Systems / Facia / DA-RM-08N001-01-005 - Remove/Install air vent - Facia
Preparation work
1.     
2.     
Care Point: Disconnect 12V battery during Remove/Install seat procedure.
3.     
Care Point: Remove both sides.
4.     
Care Point: Remove both sides
5.     
Care Point: Remove both sides
6.     
Care Point: Remove both sides
7.     
8.     
9.     
10.    
Care Point: Remove both sides
11.    
12.    
13.    
14.    
15.    
16.    
17.    
18.    
Care Point: When removing the facia, also remove the right hand display control unit bracket.
19.    
20.    
21.    
22.    
23.    
Care Point: Remove both sides.
24.    
Care Point: Disconnect body controller only.
25.    
26.    
Care Point: Vehicles fitted with 12 speakers (High line) Audio system only.
27.    

Remove air vent - Facia
 
Care Point:
Carefully place facia upside down on a suitable place.

 
1.  
Remove screws (1).
 

 
Care Point:
Centre section must be detached first in order to remove side sections.

Care Point:
Carry out steps 2 and 3 only to remove centre section vent.

Care Point:
Duct hoses on steps 2 and 3 removed from graphic for clarity only.

 
2.  
Detach vent to hoses clips (2).
 
3.  
Detach vent to hoses clips (3).
 

 
Care Point:
Carry out step 4 only to remove side section vents.

 
4.  
Detach vent to hoses clips (4).
 

5.  
Detach clips (5) to separate.
 

6.  
Remove part (6).
 


Install air vent - Facia
1.  
Install components in reverse order.
 

   
   
   Note