| | | Care Point: | Make sure that the knock sensor is correctly fitted to the correct part of the vee harness.
|
| Care Point: | Position knock sensor against anti rotation stop on engine block (2).
|
| Care Point: | Make sure electrical connector is located correctly.
|
| |
| 1. | Rotate knock sensors (1) to the correct positions as shown.
| |
| | | Care Point: | Clean engine vee of any coolant / oil residue before installation of the oil filter housing.
|
| |
| 2. | Install components in reverse order.
| |
| 3. | Check for leaks.
| |