Preparation work
| 1. | |
| 2. | |
| 3. | |
| 4. | |
| 5. | |
| 6. | |
| 7. | |
| 8. | |
| 9. | |
| 10. | |
| 11. | |
| 12. | |
| 13. | |
| 14. | |
| 15. | |
| 16. | |
| 17. | |
| 18. | |
| 19. | |
| 20. | |
| 21. | |
| 22. | |
| 23. | |
| 24. | |
| 25. | |
| 26. | |
| 27. | |
| 28. | |
| 29. | |
| 30. | |
| 31. | |
| 32. | |
| 33. | |
| 34. | Care Point: When removing RH side.
|
| 35. | |
| 36. | |
| 37. | |
 WARNING!
| |
Risk of burning and fire when handling hot or glowing objects!
Unprotected contact with hot or glowing objects can cause severe burns to the skin and eyes. If glowing objects come into contact with water, hot steam or hot splashing water this can result in severe skin and eye burns. Severe and possibly permanent injuries can result if hot or glowing objects come into contact with unprotected skin or eyes. Fire can result if glowing objects come into contact with flammable materials or substances.
Wear protective clothing, safety glasses and heat resistant gloves.
| • | Avoid sparks and keep objects away from flammable materials and substances when handling glowing objects.
|
| |
 CAUTION!
| |
Risk of injury when handling sharp vehicle parts!
Injuries are possible from cutting, scratching or scraping against the burr when working on body, superstructure, assembly and chassis parts which cannot be or are not yet deburred due to production procedure or processing stage.
Wear protective gloves when working with sharp vehicle parts.
| • | Deburr repair panels and processed cut edges.
|
| |
Remove heatshield - Exhaust manifold - Upper - Rear - Left hand
Remove heatshield - Exhaust manifold - Upper (Right and Front Left)
| 1. | | | | 2. | Remove front heatshield (2).
| | | 
|
Remove heatshield - Exhaust manifold - Cylinder head
| 1. | | | | 2. | Remove cylinder head heatshield (4).
| | | 
|
Install heatshield - Exhaust manifold
| 1. | Install components in reverse order.
| | |