Preparation work
| 1. | |
| 2. | Care Point: Remove both sides.
|
| 3. | Care Point: Remove both sides.
|
| 4. | |
| 5. | Care Point: Remove both sides.
|
| 6. | |
| 7. | |
| 8. | |
| 9. | Care Point: Remove both sides.
|
| 10. | Care Point: Remove both sides. Remove if replacing bumper panel or LTR side duct, otherwise disconnect only.
|
| 11. | |
Remove splitter - Front bumper
| | | Care Point: | Apply protective tape to the surrounding area.
|
| Care Point: | Risk of component damage.
|
| | | 1. | | | | 2. | Remove clips (2).
| | | 
|
| 3. | Release retaining tabs (3) and separate splitter from bumper panel.
| | | | | Care Point: | If replacing splitter, continue to steps 4 and 5.
|
| | | 4. | | | | 5. | Remove three skid plates from the underside of the splitter.
| | | 
|
Install splitter - Front bumper
| | | Care Point: | Inspect and replace damaged clips.
|
| | | 1. | Install components in reverse order.
| | | | | Care Point: | The procedures below must be claimed separately if you make a warranty claim.
|
| | | 2. | | | | 3. | | | |