Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Body Panels and Closures / Closures / Closure Seals / DA-RM-02A052-18-006 - Remove/Install Seal - Primary - Door glass
Preparation work
1.     
2.     
Care Point: Lower the Glass - Door 150mm from the upper edge of the door frame before disconnecting the battery.
3.     
4.     
5.     
6.     
Care Point: Remove the upper loudspeaker only.
7.     
Care Point: Disconnect only.
8.     
Care Point: Disconnect only.
9.     
10.    
11.    
12.    

Remove Seal - Primary - Door glass
1.  
Remove the seal (1) from the cantrail carrier in the direction shown.
 

2.  
Remove the seal (1) from the B post finisher in the direction shown.
 
3.  
Remove the seal.
 


Install Seal - Primary - Door glass
1.  
Install the seal in reverse order.
Push the seal (1) firmly onto the cantrail seal carrier and B post finisher in the direction shown.
 


   
   
   Note