Preparation work
| 1. | |
| 2. | Care Point: Lower the Glass - Door 150mm from the upper edge of the door frame before disconnecting the battery.
|
| 3. | |
| 4. | |
| 5. | |
| 6. | Care Point: Remove the upper loudspeaker only.
|
| 7. | Care Point: Disconnect only.
|
| 8. | Care Point: Disconnect only.
|
| 9. | |
| 10. | |
| 11. | |
| 12. | |
Remove Seal - Primary - Door glass
| 1. | Remove the seal (1) from the cantrail carrier in the direction shown.
| | | 
|
| 2. | Remove the seal (1) from the B post finisher in the direction shown.
| | | 3. | Remove the seal.
| | | 
|
Install Seal - Primary - Door glass
| 1. | Install the seal in reverse order.
Push the seal (1) firmly onto the cantrail seal carrier and B post finisher in the direction shown.
| | | 
|