Repair instructions
    Body Structures
    Body Panels and Closures
      Panels
        Body Panels Service Procedures
        Rear Panels
        Front Panels
          DA-RM-02A051-01-001 - Remove/Install fender - Front
          DA-RM-02A051-01-002 - Remove/Install fender brackets - Front
          DA-RM-02A051-01-003 - Remove/Install fender outrigger - Front
        Bodyside Assembled
        Engine Bay Panels
      Closures
      Active Aero
      Glazing - Closures and Dynamic
    Body Exterior
    Chassis
    Powertrain
    Electrical
    Interior
    Accessories
    PDI/Service/Track/Technical Sheets
    Paint Technical Data Sheets
    Wiring Schematics
  Customer Service
       Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Body Panels and Closures / Panels / Front Panels / DA-RM-02A051-01-002 - Remove/Install fender brackets - Front
Preparation work
1.     
2.     
Care Point: Remove both sides.
3.     
Care Point: Remove both sides.
4.     
5.     
Care Point: Remove both sides.
6.     
7.     
8.     
9.     
Care Point: Remove both sides.
10.    
Care Point: Remove both sides. Disconnect only.
11.    
12.    
Remove fender brackets - Front
1.  
Remove bolts (1).
 
2.  
Remove the fender bracket - Front (2).(M6x16) 5 Nm
 
3.  
Remove bolts (3).(M6x16) 5 Nm
 
4.  
Remove fender bracket - Front (4).
 
5.  
Remove bolts (5) and remove the fender bracket - Front.(M6x16) 5 Nm
 
6.  
Remove bolts (6) and remove the fender bracket - Front.(M6x16) 5 Nm
 
7.  
Remove bolts (7) and remove the fender bracket - Front.(M6x16) 5 Nm
 
8.  
Remove bolts (8) and remove the fender bracket - Front.(M6x16) 5 Nm
 
9.  
Remove bolts (9) and remove the fender bracket - Front.(M6x16) 5 Nm
 
Install fender brackets - Front
1.  
Install components in reverse order.
 
 
Care Point:
The procedure below must be claimed separately if you make a warranty claim.
 
2.   
   
   
   Note