Preparation work
| 1. | |
| 2. | Care Point: Remove both sides.
|
| 3. | |
| 4. | |
 WARNING!
| |
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
| |
Remove pressure switch - Oil
| 1. | Disconnect and lay aside ISG hose (1).
| | | 
|
| 2. | Disconnect fuel hoses (2).
| | | 3. | Disconnect vacuum hose (3).
| | | 4. | Remove bolts (4).
| | | 5. | Release hoses (5) from retaining bracket.
| | | 
|
| 6. | Disconnect electrical connector (6).
| | | 7. | Remove oil pressure switch (7). 20 Nm
| | | 
|
Install pressure switch - Oil
| 1. | Install components in reverse order.
| | | 2. | Read out and clear error memory.
| | |