Preparation work
| 1. | |
| 2. | Care Point: Remove both sides.
|
| 3. | |
| 4. | |
| 5. | |
 WARNING!
| |
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
| |
Remove sensor - Cylinder head temperature
| 1. | Disconnect electrical connector (1).
| | | 2. | | | | 
|
Install sensor - Cylinder head temperature
| 1. | Install components in reverse order.
| | | 2. | Read out and clear error memory.
| | |