Preparation work
| 1. | |
| 2. | |
| 3. | |
| 4. | Care Point: Remove both sides.
|
| 5. | Care Point: Remove both sides.
|
| 6. | |
Remove bumper assembly - Rear
| | | Care Point: | Outer bumper grilles will remain in place, centre grille will be removed with bumper.
|
| Care Point: | Risk of paint damage. Protect surrounding area.
|
| Care Point: | Lift airbrake manually to allow clearance.
|
| Care Point: | Vehicles not fitted with a rear camera will only have two electrical connectors.
|
| | | 1. | Detach clips and disconnect electrical connector (1).
| | | 
|
| 2. | Release heatshield (2).
| | | 
|
| | | Care Point: | On both sides of the vehicle.
|
| | | 3. | Remove bolts (3).
| | | 4. | | | | | | Care Point: | Vehicles fitted with side markers only.
|
| | | 5. | Disconnect electrical connector (5).
| | | 
|
| | | Care Point: | With the aid of another technician, supporting the bumper assembly.
|
| Care Point: | Vehicles not fitted with optional carbon fibre rear bumper centre panel have additional fixings (6) on the inside of the diffuser support bracket (highlighted with dotted line in graphic).
|
| | | 6. | | | | | | Care Point: | Risk of component damage, check for clash conditions during removal.
|
| | | 7. | Remove bumper assembly from vehicle.
| | | | | Care Point: | If replacing part of bumper assembly.
|
| Care Point: | Where required.
|
| | | 8. | Remove the following components:
| | | 
|
Install bumper assembly - Rear
| 1. | Install components in reverse order.
| | | | | Care Point: | The procedures below must be claimed separately if you make a warranty claim.
|
| | | 2. | or
| | | 3. | | | |