| | | Care Point: | Make sure entire sill/rocker is cleaned (3), even if vehicle is fitted with sill covers.
|
| |
| 1. | | |
| 2. | Apply promoter to floor / rocker area.
| |
| 3. | Locate front floor covering in to the vehicle.
| |
| 4. | Locate front floor covering under brake pedal / front of vehicle.
| |
| 5. | Fit inboard edge of front floor covering underneath tunnel mounting brackets.
| |
| 6. | Remove tape backing from front edge of front floor covering.
| |
| 7. | Locate front floor covering with clips in to tub.
| |
| 8. | Remove tape backing from outboard edge of front floor covering.
| |
| 9. | Remove tape backing from rear edge of front floor covering.
| |
| | | Care Point: | Make sure that carpet is evenly adhered to the vehicle.
|
| |
| 10. | Make sure front floor covering is correct orientation and stuck down.
| |
| 11. | Install components in reverse order.
| |