720S

1.	DA-RM-03A071-07-002 - Remove/Install access hatch - Luggage bin
2.	Care Point: Lower the Glass - Door 150mm from the upper edge of the door frame before disconnecting the battery. DA-RM-07M003-00-001 - Disconnect/Connect Li-ion battery
3.	DA-RM-07M002-01-001 - Remove/Install switch - Door release / Window control
4.	DA-RM-07M002-01-009 - Remove/Install control panel - Auxiliary
5.	DA-RM-08N001-12-001 - Remove/Install trim - Door
6.	Care Point: Remove the upper loudspeaker only. DA-RM-07M021-02-003 - Remove/Install loudspeaker - Door
7.	Care Point: Disconnect only. DA-RM-07M002-05-001 - Remove/Install sensor - Occupant Restraint - Pressure
8.	Care Point: Disconnect only. DA-RM-07M002-02-003 - Remove/Install control unit - Door
9.	DA-RM-02A056-04-001- Remove/Install glass - Door
10.	DA-RM-02A052-09-001 - Remove/Install mirror assembly - Side
11.	DA-RM-02A052-05-004 - Remove/Install aero duct - Door
12.	DA-RM-02A052-05-005 - Remove/Install blade - Door
13.	DA-RM-02A052-05-002 - Remove/Install applique - Door

Remove switch - Door release - External

Care Point:

Protect the surrounding area.

Remove bolts (1).(M6x40) 6 Nm

Release winglet (2) from the adhesive pads (3).

Care Point:

Guide door switch wiring harness through winglet.

Loosen nut and remove door switch from winglet.0.5 Nm

Install switch - Door release - External

Care Point:

Remove excess adhesive.

Care Point:

Clean adhesive mounting area using Betaclean 3900.

Care Point:

Replace the adhesive tape.3M PT1100

Install components in reverse order.

Care Point:

The procedure below must be claimed separately if you make a warranty claim.

V. 1.6