Preparation work
 WARNING!
| |
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
| |
Remove solenoid - Cam phaser - Exhaust right hand side
| 1. | Disconnect electrical connector (2).
| | | 2. | | | | | | Care Point: | Move coolant pipe partially.
|
| | | 3. | Remove engine cam phaser solenoid (1).
| | | 
|
Remove solenoid - Cam phaser - Exhaust left hand side
| 1. | Disconnect electrical connector (5).
| | | 2. | | | | 3. | Remove engine cam phaser solenoid (4).
| | | 
|
Install solenoid - Cam phaser - Exhaust
| | | Care Point: | If O-Ring is damaged, replace cam phaser solenoid.
|
| | | 1. | | | | 2. | Install components in reverse order.
| | | 3. | Check engine for leaks.
| | | 4. | | | | 5. | Check cooling system.
| | | 6. | Read out and clear error memory.
| | |