720S

Special advice

Tools/Equipment

Fluids, lubricants, adhesive

Content

Description

Legend

Location

Dataflow

Diagram

Location

Instructions

Body Exterior / Ducts, Vents and Floors / Side Ducts and Vents / DA-RM-03A075-02-001 - Remove/Install duct - High temperature radiator

Preparation work

1.	DA-RM-01A001-00-001 - Secure/Lift vehicle on platform
2.	DA-RM-04B005-01-001 - Remove/Install wheel - Rear
3.	DA-RM-03A076-02-001 - Remove/Install wheel arch liner - Rear
4.	DA-RM-03A075-05-002 - Remove/Install floor panel - Rear extension
5.	DA-RM-02A051-03-004 - Remove/Install panel - Side duct finisher
6.	DA-RM-02A051-03-003 - Remove/Install panel - Dirty air duct
7.	DA-RM-02A051-03-002 - Remove/Install bodyside - Lower
8.	DA-RM-02A051-03-005 - Remove/Install panel - Aero bridge
9.	Care Point: If removing Left-hand side, follow pre-works and detach from fuel filler bowl only. DA-RM-04K001-02-001 - Remove/Install fuel filler neck
10.	DA-RM-02A051-03-001 - Remove/Install bodyside - Upper - Left

Remove duct - High temperature radiator

1.	Remove bolt (1). (M6x16) 4 Nm
2.	Remove bolt from bracket (2). (M6x16) 4 Nm
3.	Remove bolts (3).(M6x14) 4 Nm
4.	Remove bolts (4).(M6x16) 4 Nm
5.	Remove duct from vehicle.

Install duct - High temperature radiator

Install components in reverse order.