Preparation work
| 1. | |
| 2. | |
| 3. | |
| 4. | |
| 5. | |
| 6. | Care Point: Remove both sides.
|
| 7. | Care Point: Remove both sides.
|
| 8. | |
| 9. | Care Point: Remove both sides.
|
| 10. | Care Point: Remove both sides. Remove if replacing bumper panel or LTR side duct, otherwise disconnect only.
|
| 11. | |
| 12. | |
| 13. | |
WARNING!
| |
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
| |
Remove duct - Low temperature radiator
| | | Care Point: | Steps 1 and 2 apply to the LH side only.
|
| | | 1. | | | | 2. | Lay aside bonnet emergency release latch.
| | | 3. | | | | 4. | Remove clip (3).
| | | 5. | Disconnect hose (4) and lay aside.
| | | 
|
| 
|
| 
|
| 9. | | | | | | Care Point: | Assembly includes LTR radiator.
|
| | | 10. | Remove LTR assembly.
| | | 
|
| 11. | | | | 12. | Separate duct - Low temperature radiator.
| | | 13. | Remove LTR from assembly.
| | | | | Care Point: | Transfer components as required.
|
| | | 14. | Replace duct - Low temperature radiator.
| | | 
|
Install duct - Low temperature radiator
| 1. | Install components in reverse order.
| | |