Preparation work
| 1. | |
| 2. | |
| 3. | |
| 4. | Care Point: Remove both sides.
|
| 5. | Care Point: Remove both sides.
|
| 6. | |
| 7. | |
| 8. | |
Remove light - Number plate
| | | Care Point: | Protect surrounding trim and paint.
|
| Care Point: | The heatshield is deemed a one use part and must be replaced.
|
| | | 1. | Remove bumper heatshield.
| | |
|
| 2. | Remove number plate light housing (1).
| | | 
|
| 3. | Release number plate light in the direction shown (2, 3).
| | | 4. | Disconnect number plate light and remove from bumper.
| | | 
|
Install light - Number plate
| 1. | Remove excess adhesive from bumper and number plate light housing (1).
| | | 2. | | | | 3. | Install components in reverse order.
Apply new Tape - GT6012 when installing number plate housing (1).
| | | | | Care Point: | Where required, check and re-calibrate vehicle camera system.
|
| | | 4. | or
| | |