Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Body Panels and Closures / Closures / Side Mirrors / DA-RM-02A052-09-004 - Remove/Install motor - Door mirror power fold
Preparation work
1.     
2.     
3.     
4.     
5.     
6.     
Care Point: Remove lower loudspeaker only.
7.     
8.     
9.     

Remove motor - Door mirror power fold
1.  
Disconnect power fold motor electrical connector (1).
 

2.  
Disconnect actuator electrical connector (2).
 
3.  
Remove screws (3).1.2 Nm
 
4.  
Remove power fold motor (4).
 


Install motor - Door mirror power fold
1.  
Install components in reverse order.
 
2.  
Check functionality.
 
 
Care Point:
The procedure below must be claimed separately if you make a warranty claim.

 
3.  
Check camera alignment, adjust if required. DA-RM-07M021-00-001 - Calibrate 360 camera system
 
4.  
Read out and clear error memory.
 

   
   
   Note