Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Body Panels and Closures / Closures / Side Mirrors / DA-RM-02A052-09-005 - Remove/Install actuator - Door mirror
Preparation work
1.     
2.     
3.     
4.     
5.     
6.     
Care Point: Remove lower loudspeaker only.
7.     
8.     
9.     

Remove actuator - Door mirror
1.  
Disconnect power fold motor electrical connector (1).
 

2.  
Disconnect actuator electrical connector (2).
 
3.  
Remove screws (3).1.2 Nm
 
4.  
Remove door mirror actuator (4).
 


Install actuator - Door mirror
1.  
Install components in reverse order.
 
2.  
Check functionality.
 
 
Care Point:
The procedure below must be claimed separately if you make a warranty claim.

 
3.  
Check camera alignment, adjust if required. DA-RM-07M021-00-001 - Calibrate 360 camera system
 
4.  
Read out and clear error memory.
 

   
   
   Note