Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Body Panels and Closures / Closures / Side Mirrors / DA-RM-02A052-09-001 - Remove/Install mirror assembly - Side
Preparation work
1.     
2.     
3.     
4.     
5.     
6.     
Care Point: Remove lower loudspeaker only.

Remove mirror assembly - Side
 
Care Point:
Accessed as shown (1).

 
1.  
Disconnect electrical connector/s.
 
 
Care Point:
Support the mirror assembly.

 
2.  
Remove bolts (2). (M6x25) 8 Nm
 
 
Care Point:
Guide the mirror assembly wiring harness/es through the door skin.

 
3.  
Remove the mirror assembly - side.
 


Install mirror assembly - Side
 
Care Point:
Make sure the mirror assembly wiring harness is located correctly.

 
1.  
Install components in the reverse order.
 
 
Care Point:
The procedure below must be claimed separately if you make a warranty claim.

 
2.  
Check camera alignment, adjust if required.DA-RM-07M021-00-001 - Calibrate 360 camera system
 

   
   
   Note