Repair instructions
    Body Structures
    Body Panels and Closures
      Panels
      Closures
        Closures Service Procedures
        Bonnet Structure
        Bonnet Latch
        Door Structure
          DA-RM-02A052-05-001 - Remove/Install door
          DA-RM-02A052-05-002 - Remove/Install applique - Door
          DA-RM-02A052-05-003 - Remove/Install winglet - Door
          DA-RM-02A052-05-004 - Remove/Install aero duct - Door
          DA-RM-02A052-05-005 - Remove/Install blade - Door
          DA-RM-02A052-05-006 - Remove/Install stone deflector - Door
          DA-RM-02A052-05-007 - Remove/Install Mesh - Aero duct - Door
          DA-RM-02A052-05-008 - Replace Door
          DA-RM-02A052-05-009 - Remove/Install Access panel - Door
          DA-RM-02A052-05-010 - Remove/Install Support - Door - Secondary
        Door Hinge
        Door Latch
        Side Mirrors
        Tailgate/Engine Cover Structure
        Closure Seals
      Active Aero
      Glazing - Closures and Dynamic
    Body Exterior
    Chassis
    Powertrain
    Electrical
    Interior
    Accessories
    PDI/Service/Track/Technical Sheets
    Paint Technical Data Sheets
    Wiring Schematics
  Customer Service
Instructions
Body Panels and Closures / Closures / Door Structure / DA-RM-02A052-05-004 - Remove/Install aero duct - Door
Remove aero duct - Door
 
Care Point:
Wheel removed in graphic for clarity only.
Care Point:
Turn the steering wheel onto full lock.
 
1.  
Remove screws (1).(M4x12) 1 Nm
 
2.  
Release the lower clip (2).
 
 
Care Point:
Rear edge secured with tape (3).
Care Point:
Risk of component damage.
 
3.  
Remove aero duct.
 
Install aero duct - Door
1.  
Remove excess adhesive.
 
2.  
Clean adhesive mounting area using Betaclean 3900.
 
3.  
Replace adhesive tape 3M PT1100.
 
4.  
Install components in reverse order.
 
   
   
   Note