Special advice

Tools/Equipment

Fluids, lubricants, adhesive

Content

Description

Legend

Location

Dataflow

Diagram

Location

Instructions

Electrical / Electrical Hardware / Horn / DA-RM-07M003-03-001 - Remove/Install Horn

Preparation work

1.	DA-RM-01A001-00-001 - Secure/Lift vehicle on platform
2.	DA-RM-03A071-07-002 - Remove/Install access hatch - Luggage bin
3.	Care Point: Do the two sides. DA-RM-03A071-02-001 - Remove/Install cover - Fender inner
4.	DA-RM-03A071-07-001 - Remove/Install luggage bin
5.	DA-RM-07M003-00-001 - Disconnect/Connect Li-ion battery
6.	Care Point: Do the two sides. DA-RM-04B004-01-001 - Remove/Install wheel - Front
7.	Care Point: Do the two sides. DA-RM-03A076-01-001 - Remove/Install wheel arch liner - Front
8.	DA-RM-03A075-04-001 - Remove/Install floor panel - Front
9.	Care Point: Do the two sides. DA-RM-03A073-01-001 - Remove/Install light - Headlamp
10.	Care Point: Do the two sides. Remove if replacing bumper panel or LTR side duct, otherwise disconnect only. DA-RM-03A073-01-003 - Remove/Install light - Side repeater / Sidemarker - Front
11.	DA-RM-03A071-01-001 - Remove/Install bumper - Front

Remove horn

1.	Disconnect the electrical connector (1).
2.	Remove bolt (2). (M6x12) 8 Nm
3.	Remove the horn.

Install horn

Install components in reverse order.