720S

1.	DA-RM-03A071-07-002 - Remove/Install access hatch - Luggage bin
2.	DA-RM-07M003-00-001 - Disconnect/Connect Li-ion battery
3.	Care Point: Remove both sides. DA-RM-08N001-07-001 - Remove/Install seat
4.	Care Point: Remove both sides. DA-RM-08N001-08-001 - Remove/Install trim - B-pillar
5.	DA-RM-08N001-08-009 - Remove/Install retention bar - Luggage
6.	DA-RM-08N001-08-008 - Remove/Install carpet / cover - Rear
7.	DA-RM-08N001-08-003 - Remove/Install trim - Capping panel / Luggage shelf trim
8.	Care Point: Remove both sides. DA-RM-08N001-04-002 - Remove/Install HVAC shroud
9.	DA-RM-08N001-02-002 - Remove/Install finishers - Facia console
10.	DA-RM-08N001-02-003 - Remove/Install face plate - Facia Console
11.	DA-RM-08N001-02-004 - Remove/Install switch carrier - Facia Console
12.	DA-RM-08N001-04-001 - Remove/Install tunnel console

Remove Antenna - Keyless go - Interior - Tunnel

Care Point:

Risk of damage. Be careful with easily damaged parts and trim.

Apply protection to the tunnel console to prevent damage.

Position the tunnel console on a clean surface.

Detach the antenna (1) from the dual lock strip and remove it in the direction shown.

Install Antenna - Keyless go - Interior - Tunnel

1.	Use Betaclean 3900 on both surfaces.
2.	Use Scotchmount 4299 on both surfaces.
3.	Use 3M Dual Lock to attach both parts.
4.	Install the components in reverse order.

V. 1.9