Preparation work
| 1. | |
| 2. | |
| 3. | |
| 4. | Care Point: Front section only.
|
Remove suspension displacement sensor
| 1. | Disconnect electrical connector (1).
| | | 2. | Release lock and detach displacement sensor link rod (2).
| | | 3. | | | | 4. | Remove sensor from vehicle.
| | | 
|
Install suspension displacement sensor
| | | Care Point: | Check torque of displacement sensor link rod ball studs. 6 Nm
|
| | | 1. | Install components in reverse order.
| | | 2. | Check movement of displacement sensor link rod, ensuring it moves freely.
| | | 3. | Connect McLaren Diagnostic System (MDS).
| | | 4. | Proceed to Diagnostic Toolbox.
| | | 5. | Select Chassis Control Unit (CCU).
| | | 6. | Access sequences.
| | | 7. | Carry out Adaptive Damping Calibration sequence.
| | |