Preparation work
| 1. | |
| 2. | |
| 3. | Care Point: Remove both sides.
|
| 4. | Care Point: Remove both sides.
|
| 5. | |
| 6. | Care Point: Remove both sides.
|
| 7. | |
Remove control unit - Sound amplifier (AMP)
| 1. | Disconnect electrical connectors (1).
| | | 2. | | | | 3. | Remove audio amplifier (3).
| | | 
|
Install control unit - Sound amplifier (AMP)
| | | Care Point: | Do not damage child anchorage bracket if fitted.
|
| | | 1. | Install amplifier.
| | | 2. | | | | | | Care Point: | If amplifier has not been replaced, proceed to step 4.
|
| Care Point: | Do not start vehicle.
|
| | | 3. | Turn vehicle ignition on.
| | | | | Care Point: | ADI hardware will communicate with amplifier, and update if required automatically.
This will be displayed on ADI touchscreen.
|
| Care Point: | Do not turn off ignition until update is complete.
|
| | | 4. | Allow ADI hardware to update amplifier software.
| | | 5. | Check functionality.
| | | 6. | Install components in reverse order.
| | | 7. | Read out and clear error memory.
| | |