Preparation work
 WARNING!
| |
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
| |
Remove primary / secondary shaft cover – Transmission
| | | Care Point: | Note: The removal of both of the secondary shaft covers and the primary shaft cover may not be required.
|
| | | 1. | | | | 2. | Remove secondary shaft covers (2).
| | | 3. | | | | 4. | Remove primary shaft cover (4).
| | | 5. | Remove shaft cover O-ring.
| | | 
|
Install primary / secondary shaft cover – Transmission
| | | Care Point: | Renew O-ring (5) before installing shaft cover.
|
| Care Point: | Make sure O-ring (5) has been correctly fitted to the cover to achieve required sealing.
|
| Care Point: | Make sure groove (arrow) is clean and free from dirt and debris to avoid contamination.
|
| | | 1. | Renew shaft cover O-ring (5).
| | | 2. | Install shaft cover in reverse order.
| | | 3. | | | | 4. | Check transmission for leaks.
| | | 5. | Install components in reverse order.
| | | 
|