Instructions
Powertrain / Engine Oil System / Engine Oil Tank / DA-RM-05F003-01-003 - Remove/Install oil separator
Preparation work
1.     
2.     
3.     
4.     
Care Point: Remove the left side only.
5.     
Care Point: Remove the left side only.
6.     
7.     
8.     
9.     
10.    
Care Point: Disconnect from the oil tank only.
11.    
12.    
13.    

WARNING!
 
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
 

Remove oil separator
1.  
Remove clip and disconnect hose (1).
 

2.  
Remove clip and disconnect hose (2).
 

 
Care Point:
Engine assembly removed for clarity. Oil separator bolts can be accessed through oil tank and fuel tank aperture.

 
3.  
Remove bolts (3). (M6x16) 8 Nm
 
4.  
Remove the oil separator (4).
 


Install oil separator
1.  
Install components in the reverse order.
 

   
   
   Note