720S

Tools/Equipment

Fluids, lubricants, adhesive

Content

Description

Legend

Location

Dataflow

Diagram

Location

Instructions

Powertrain / Engine Oil System / Engine Oil Tank / DA-RM-05F003-01-002 - Remove/Install sensor - Oil level and temperature

Preparation work

1.	DA-RM-01A001-00-001 - Secure/Lift vehicle on platform
2.	DA-RM-03A071-07-002 - Remove/Install access hatch - Luggage bin
3.	DA-RM-07M003-00-001 - Disconnect/Connect Li-ion battery
4.	Care Point: Remove the left side only. DA-RM-04B005-01-001 - Remove/Install wheel - Rear
5.	Care Point: Remove the left side only. DA-RM-03A075-05-002 - Remove/Install floor panel - Rear extension
6.	DA-RM-01A004-02-001 - Remove/Install floor panel - Engine
7.	DA-RM-02A051-08-001 - Remove/Install panel - Service Cover
8.	DA-RM-02A051-08-003 - Remove/Install panel - Engine bay cover
9.	DA-RM-05F003-00-001 - Drain/fill - Engine oil
10.	DA-RM-04K001-00-001 - Drain/Fill fuel tank
11.	DA-RM-04K001-01-001 - Remove/Install fuel tank
12.	Care Point: Disconnect from the oil tank only. DA-RM-05F003-03-001 - Remove/Install oil filler tube
13.	DA-RM-05F003-02-004 - Remove/Install hose - Oil tank - Oil return
14.	DA-RM-05F003-02-003 - Remove/Install hose - Oil tank - Oil feed
15.	DA-RM-05F003-01-001 - Remove/Install oil tank

WARNING!
Possible fluid spills from vehicle systems during repairs or maintenance. Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours. Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.

Remove sensor - Oil level and temperature

Remove the oil level and temperature sensor (1). (M20) 38 Nm

Install sensor - Oil level and temperature

Replace O-ring seals.

Care Point:

Make sure electrical connector is located correctly.

Install components in reverse order.