Instructions
Powertrain / Engine Oil System / Engine Oil Tank / DA-RM-05F003-01-001 - Remove/Install oil tank
Preparation work
1.     
2.     
3.     
4.     
Care Point: Remove the left side only.
5.     
Care Point: Remove the left side only.
6.     
7.     
8.     
9.     
10.    
11.    
12.    
Care Point: Disconnect from the oil tank only.
13.    
14.    

WARNING!
 
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
 

Remove oil tank
1.  
Release clips (1).
 
2.  
Remove heat shield (2).
 

3.  
Disconnect the oil level and temperature sensor connector (3).
 

4.  
Release clip (4) 3.5 Nm and disconnect oil separator hose.
 

5.  
Remove nut (5). (M6) 8 Nm
 
6.  
Remove bolts (6). (M6x16) 8 Nm
 
7.  
Remove the oil tank.
 


Install oil tank
1.  
Replace O-ring of any oil pipes removed.
 
2.  
Install components in reverse order.
 

   
   
   Note