Preparation work
| 1. | |
| 2. | |
| 3. | |
| 4. | |
| 5. | Care Point: Remove both sides.
|
| 6. | |
| 7. | |
| 8. | |
| 9. | |
| 10. | |
| 11. | |
 WARNING!
| |
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
| |
Remove sensor - Coolant temperature
| 1. | Disconnect electrical connector (1).
| | | 2. | | | | 
|
Install sensor - Coolant temperature
| | | Care Point: | Make sure electrical connector is located correctly.
|
| | | 1. | Install coolant temperature sensor.
| | | 2. | | | | 3. | Start engine and leave running for 5 minutes.
| | | 4. | Check engine for coolant leaks.
| | | 5. | Install components in reverse order.
| | | 6. | Read out and clear error memory.
| | |