Repair instructions
    Body Structures
    Body Panels and Closures
    Body Exterior
    Chassis
      Suspension Front
      Suspension Rear
        Damper and Actuator Assemblies Rear
        Uprights Rear
        Transverse Links Rear
        Road Springs Rear
        Rear Toe Link
          DA-RM-04B002-05-001 - Remove/Install tie rod - Rear
      Suspension - Systems
      Suspension - Wheels and Tyres Front
      Suspension - Wheels and Tyres Rear
      Brakes Front
      Brakes Rear
      Brakes - Systems
      Brakes - Parking Brake
      Steering
      Fuel Tank
      Fuel System
      Cooling - High Temperature
      Cooling - Low Temperature
      Heating Ventilation & Air Conditioning (HVAC)
    Powertrain
    Electrical
    Interior
    Accessories
    PDI/Service/Track/Technical Sheets
    Paint Technical Data Sheets
    Wiring Schematics
  Customer Service
       Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Chassis / Suspension Rear / Rear Toe Link / DA-RM-04B002-05-001 - Remove/Install tie rod - Rear
Preparation work
1.     
2.     
3.     
4.     
Remove tie rod - Rear
1.  
Loosen adjustment nut (1).(M14) 30 Nm
 
 
Care Point:
Use ball joint splitter to separate.
 
2.  
Remove nut (2).(M14) 90 Nm
 
3.  
Pull back dust cover.
 
4.  
Unscrew tie rod (3) from subframe.(M16) 80 Nm
 
5.  
Remove tie rod (3).
 
Install tie rod - Rear
 
Care Point:
Apply an initial torque of 70Nm to the tie rod. Then apply a secondary torque of 80Nm. (M16) 80 Nm
 
1.  
Install components in reverse order.
 
 
Care Point:
The procedure below must be claimed separately if you make a warranty claim.
 
2.  
Make sure that the suspension geometry is in tolerance.
 
   
   
   Note