Preparation work
| 1. | |
| 2. | |
| 3. | |
| 4. | Care Point: Disconnect the negative and positive terminals and move the fuse box aside to access the washer pump. Do not remove the battery.
|
 WARNING!
| |
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
| |
Remove pump - Washer system
| | | Care Point: | Syphon washer fluid.
|
| | | 1. | | | | 2. | Detach the remaining three clips and lay aside the wiring harness.
| | | 3. | Disconnect washer pump electrical connector.
| | | 4. | Disconnect washer tubing from washer pump.
| | | 
|
| | | Care Point: | Remove in an upwards direction.
|
| Care Point: | Washer pump is fitted with a rubber seal.
|
| | | 5. | Remove washer pump (2).
| | | 
|
Install pump - Washer system
| | | Care Point: | Make sure the rubber seal is located correctly.
|
| | | 1. | Install components in reverse order.
| | | 2. | Check functionality.
| | |