Repair instructions
    Body Structures
    Body Panels and Closures
    Body Exterior
    Chassis
    Powertrain
    Electrical
    Interior
    Accessories
      Panels
      Mid Structures
      Interior systems
        MSO Seat assembly
          DA-RM-20N002-97-001 - Install Brackets - Crotch strap - Adjustable sport seat
          DA-RM-20N002-97-002 - Install Brackets - Crotch strap - Non-adjustable sport seat
    PDI/Service/Track/Technical Sheets
    Paint Technical Data Sheets
    Wiring Schematics
  Customer Service
       Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Accessories / Interior systems / MSO Seat assembly / DA-RM-20N002-97-002 - Install Brackets - Crotch strap - Non-adjustable sport seat
Preparation work
1.     
2.     
3.     
Install Bracket - Crotch strap - Non-adjustable sport seat
 
Care Point:
A Left Hand Drive (LHD) passenger seat is shown. Make sure that you install the brackets to the correct seat.
Care Point:
Do not discard any fixings. The fixings will be used in the installation procedure.
 
1.   
Remove the bolt (1).
 
2.   
Remove the seat belt buckle (2).
 
3.   
Remove the bolts (3).
 
4.   
Remove and discard the inboard bracket (4).
 
5.   
Put the new inboard bracket in its installation position (5).
 
6.   
Install the bolts (6) (M8x20) 24 Nm.
 
7.   
Put the seat belt buckle in its installation position.
 
8.   
Install the seat belt buckle bolt (7) 40 Nm.
 
9.   
Remove the bolts (8).
 
 
Care Point:
Do not discard the seat belt fixings.
 
10.  
Remove and discard the outboard bracket (9).
 
11.  
Put the new outboard bracket in its installation position (10).
 
12.  
Install the bolts (11) (M8x20) 24 Nm.
 
13.  
For more information about how to install the harness, refer to Knowledge Article KA-01337 and the harness manufacturers instructions.
 
14.  
Install the remaining components in reverse order.
 
   
   
   Note