Preparation work
Install Brackets - Crotch strap - Adjustable sport seat
| | | Care Point: | A Left Hand Drive (LHD) driver seat is shown. Make sure that you install the brackets to the correct seat.
|
| Care Point: | Do not discard any fixings. The fixings will be used in the installation procedure.
|
| | | 1. | Remove the nuts (1).
| | | 2. | Loosen the nut (2).
| | | 
|
| 3. | Remove the bolt (3).
| | | 4. | Remove the seat belt buckle (4) from the bracket (5).
| | | 5. | Do step 1 for the right side of the seat.
| | | 
|
| 6. | Move the seat runners down (6).
| | | | | Care Point: | Do not discard the seat belt fixings.
|
| | | 7. | Remove and discard the brackets (7).
| | | 8. | Put the new brackets into their installation positions and install the seat runners.
| | | 
|
| 9. | The image shows the outboard bracket installation position (8).
| | | 
|
| 10. | The image shows the inboard bracket installation position (9).
| | | 
|
| 11. | Install the nuts (9) 20 Nm.
| | | 12. | Tighten the nut (10) 20 Nm.
| | | 
|
| 13. | Install the nuts (11) 20 Nm.
| | | 14. | Tighten the nut (12) 20 Nm.
| | | 15. | Put the seat belt buckle in its installation position.
| | | 
|
| 16. | Install the seat belt buckle bolt (13) 40 Nm.
| | | 17. | For more information about how to install the harness, refer to Knowledge Article KA-01337 and the harness manufacturers instructions.
| | | 18. | Install the remaining components in reverse order.
| | | 19. | Make sure that the seat adjustment operates correctly.
| | | 
|