Repair instructions
    Body Structures
    Body Panels and Closures
    Body Exterior
    Chassis
    Powertrain
    Electrical
      Wiring Harness
      Electrical Systems
      Electrical Hardware
      Infotainment
        Infotainment Service Procedures
        Sound System
        Antenna System
        ADI ECU System
        Displays
        Cameras
          DA-RM-07M021-06-001 - Remove/Install camera - Front
          DA-RM-07M021-06-002 - Remove/Install camera - Mirror
          DA-RM-07M021-06-003 - Remove/Install camera - Interior
          DA-RM-07M021-06-004 - Remove/Install camera - Rear
        Infotainment External Interface
      Electrical Misc
    Interior
    Accessories
    PDI/Service/Track/Technical Sheets
    Paint Technical Data Sheets
    Wiring Schematics
  Customer Service
       Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Electrical / Infotainment / Cameras / DA-RM-07M021-06-001 - Remove/Install camera - Front
Preparation work
1.     
2.     
3.     
Remove camera - Front
1.  
Disconnect electrical connector (1).
 
2.  
Remove screws (2). (M4x12) 3 Nm
 
3.  
Detach edge clip (3).
 
4.  
Remove camera from vehicle.
 
Install camera - Front
1.  
Install components in reverse order.
 
2.  
Check functionality.
 
 
Care Point:
The procedure below must be claimed separately if you make a warranty claim.
 
3.  
Check camera alignment, adjust if required. DA-RM-07M021-00-001 - Calibrate 360 camera system
 
   
   
   Note