Instructions
Body Exterior / HVAC / HVAC Inlet and Distribution / DA-RM-03A077-01-006 - Remove/Install drier
Preparation work
1.     
2.     
3.     
4.     
5.     

WARNING!
 
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
 

Remove drier
1.  
Remove bolt (1) and detach pipes. (M8x20) 8 Nm
 
2.  
Remove bolts (2) and remove part. (M6x16) 8 Nm
 


Install drier
 
Care Point:
Replace O-rings.

 
1.  
Install components in reverse order.
 

   
   
   Note