Remove switch - Door release / Window control
| | | Care Point: | Protect surrounding trim.
|
| Care Point: | Release from at the front edge and lift upwards to remove.
|
| Care Point: | (A) shows the clip location.
|
| | | 1. | Remove switch filler trim (1).
| | | 
|
| 2. | | | | | | Care Point: | DO NOT forcibly remove switch.
|
| | | 3. | Align tools to the rear of the window buttons.
| | | 
|
| | | Care Point: | When the tools are aligned, an audible metallic 'click
|
| | | 4. | Slide tools (T) in-between the switch pack and the door casing to release switch.
| | | 
|
| 5. | Partially remove the switch (3).
| | | 6. | Disconnect the electrical connector (4).
| | | 7. | Remove the switch (3).
| | | 
|
Install switch - Door release / Window control
| 1. | Install components in reverse order.
| | | 2. | Check functionality.
| | |