Instructions
Powertrain / Transmission Cooling System / Clutch Oil Cooler / DA-RM-05G002-03-001 - Remove/Install cooler - Clutch oil
Preparation work
1.     
2.     
3.     
4.     
5.     
6.     
7.     
8.     

WARNING!
 
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
 

Remove cooler - Clutch
 
Care Point:
Working from rear of transmission.
Graphic shows top view for reference.

 
1.  
Remove bolt (1).(M6x16) 6 Nm
 
2.  
Detach coolant pipe (2).
 
3.  
Remove bolts (3).(M6x16) 10 Nm
 

4.  
Remove bolts (3).(M6x16) 10 Nm
 
5.  
Remove clutch cooler (4) by lifting upwards, turning then removing from rear of vehicle.
 


Install cooler - Clutch
1.  
Replace and lubricate O-rings.P80 THIX
 
 
Care Point:
Make sure fluid cooler clutch is clean and free from dirt and debris to avoid contamination.

 
2.  
Install components in reverse order.
 
3.  
Check transmission for leaks.
 

   
   
   Note