Repair instructions
    Body Structures
    Body Panels and Closures
    Body Exterior
    Chassis
      Suspension Front
      Suspension Rear
      Suspension - Systems
      Suspension - Wheels and Tyres Front
      Suspension - Wheels and Tyres Rear
        Wheel and Tyre Assemblies Rear
          DA-RM-04B005-01-001 - Remove/Install wheel - Rear
          DA-RM-04B005-01-002 - Remove/Install sensor and valve - TPMS - Rear
      Brakes Front
      Brakes Rear
      Brakes - Systems
      Brakes - Parking Brake
      Steering
      Fuel Tank
      Fuel System
      Cooling - High Temperature
      Cooling - Low Temperature
      Heating Ventilation & Air Conditioning (HVAC)
    Powertrain
    Electrical
    Interior
    Accessories
    PDI/Service/Track/Technical Sheets
    Paint Technical Data Sheets
    Wiring Schematics
  Customer Service
       Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Chassis / Suspension - Wheels and Tyres Rear / Wheel and Tyre Assemblies Rear / DA-RM-04B005-01-001 - Remove/Install wheel - Rear
Preparation work
1.     
Remove wheel - Rear
 
Care Point:
Take care not to damage the wheel.
Care Point:
Inspect the wheel for damage.
Care Point:
Inspect the tyre condition.
 
1.  
Remove wheel bolts. 130 Nm
 
 
Care Point:
You must always inspect the steel or titanium wheel bolts for damage. Refer to KA-01733 when you inspect the wheel bolts.
Care Point:
Always replace the wheel bolts if they are damaged. Refer to the Spare Parts Catalogue (SPC) for part numbers.
 
2.  
Examine the wheel bolt threads and surfaces for damage.
 
3.  
Remove wheel.
 
Install wheel - Rear
 
Care Point:
If directional tyres/wheels are fitted Make sure the direction of rotation is correct when installing the wheel.
 
1.  
Install the wheel.
 
2.  
Follow tightening sequence A-E.
 
   
   
   Note