Special advice          Tools/Equipment           Fluids, lubricants, adhesive   
Instructions
Body Exterior / Wipers and Washer System / Washer System / DA-RM-03A074-01-002 - Remove/Install washer nozzle
WARNING!
 
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
 

Remove washer nozzle
1.  
Open bonnet.
 

 
Care Point:
Do not use hand tools.

 
2.  
Push top of clips (1) to release nozzle (2) by reaching within the gaps of inner bonnet panel (arrowed).
 
3.  
Disconnect washer hose (3).
 


Install washer nozzle
1.  
Install components in reverse order.
 

   
   
   Note