Repair instructions
    Body Structures
    Body Panels and Closures
    Body Exterior
      Exterior Ornamentation
        Front Bumper
        Front Trim
        Filler Bowls and Covers
          DA-RM-03A071-06-001 - Remove/Install fuel filler bowl
        Luggage
        Rear Trim
        Rear Finishers and Grilles
        Rear Bumper
      Glazing - Exterior
      Lights
      Wipers and Washer System
      Ducts, Vents and Floors
      Liners and NVH
      HVAC
    Chassis
    Powertrain
    Electrical
    Interior
    Accessories
    PDI/Service/Track/Technical Sheets
    Paint Technical Data Sheets
    Wiring Schematics
  Customer Service
Special advice
Body Exterior / Exterior Ornamentation / Filler Bowls and Covers / DA-RM-03A071-06-001 - Remove/Install fuel filler bowl
WARNING!
 
Risk of explosion, poisoning and injury working with fuel!
Fuels are highly flammable and toxic if inhaled. Fuel vapours are explosive, invisible and spread out at floor level. This vapour is poisonous when inhaled and has an anesthetizing effect in high concentrations. Fuel can cause damage to skin. For example, skin is degreased when it comes into contact with gasoline fuel.
Observe the national safety precautions and regulations.
Keep fuel away from fire, open light or ignition sources.
Ensure the work place is adequately ventilated.
Never drain or pour in fuels over assembly pits.
Store drained fuel in a suitable and sealed vessel.
Immediately eliminate any fuel which has flowed out.
Conducting work on a vehicle with open flames (e. g. welding etc.).
Before carrying out this work, remove relevant parts of fuel system and seal open fuel lines with plugs.
 

   
   
   Note