Set up celette body alignment rig
| | | Care Point: | When installing MZ elements in the straightening bench, observe the direction of the arrow in the MZ elements.
|
| Care Point: | The part numbers for the MZ elements are cast onto the side.
|
| Care Point: | Setup, straightening tool and MZ elements is shown without bodyside rear panel jig brackets.
|
| Care Point: | The arrow in the straightening tool should always point toward the front of the vehicle.
|
| Care Point: | In addition to the straightening tool number, the straightening tool for the left side have the letter "L" next to the arrow.
|
| Care Point: | The position number in combination with the 8-digit reference number (e.g.: 7199.7001), is also the order number for replacement parts.
|
| | | 1. | Front Celette MZ elements and straightening bracket set - Overview (C1 - C10).
| | | 
|
| 2. | Install Front Celette MZ elements and straightening bracket set on - Position (3 and 12).
| | | 
|
| 3. | Centre Celette MZ elements and straightening bracket set - Overview (C11 - C14).
| | | 
|
| 4. | Install Centre Celette MZ elements and straightening bracket set on - Position (21, 27).
| | | 
|
| 5. | Rear Celette MZ elements and straightening bracket set - Overview (C15 - C26).
| | | 
|
| 6. | Install Rear Celette MZ elements and straightening bracket set on - Position (34, 36, 38, 40).
| | | 
|
| 7. | Side Celette MZ elements and straightening bracket set - Overview (S1 - S2).
| | | 
|
| 8. | Install Side Celette MZ elements and straightening bracket set on - Position (23, 33) (for the outer rails (7)).
| | | 
|