Special advice
Chassis / Cooling - High Temperature / Cooling Service Procedures / DA-RM-04L001-00-001 - Drain/Fill fluid - Coolant
WARNING!
 
Risks of injury and poisoning when working with coolant!
When the engine is warm, the cooling system is pressurized. If the cooling system is opened suddenly, there is a risk of scalding from hot coolant which splashes out.
If coolant is swallowed, symptoms of poisoning such as headaches, dizziness, stomach pain, respiratory paralysis, unconsciousness, vomiting and cramps can occur.
Wear protective gloves, protective clothing and eye protection.
Allow cooling system to cool down to a coolant temperature of less than 60 °C.
Open cap of cooling system slowly; turn a conventional coolant cap as far as the first detent and turn a screwed coolant cap approx. 1/2 turn and release the pressure.
Do not put coolant in beverage containers.
 

WARNING!
 
Possible fluid spills from vehicle systems during repairs or maintenance.
Risk of thermal incidents, slip hazards, corrosion of electrical components, failure of electrical or mechanical components or unwanted odours.
Always limit fluid spills and fully clean the spilled fluid after repairs or maintenance.
 

   
   
   Note